Bencore · Smart office partitions
Stretch cable partition
Panels on steel cables and polished clamps. No vertical profile, no horizontal profile, just the wall of light.
Stretch is the partition for people who do not want to see a frame. Bencore panels are held between steel cables tensioned from floor to ceiling, joined by small clamps, all supplied in a mirror polished finish, and the result is a wall that reads as panels floating in the room. It divides a smart office without a single vertical or horizontal profile.
Because there is no frame to cut and fit, Bencore describes it as extremely easy to install: the cables are tensioned, the clamps go on, the panels go in. The catalogue shows it in bubble patterned panels dividing an open plan office, the orange desks behind it blurred into colour.
Colours and finishes
Stretch on the light table
Every code Bencore offers for Stretch, by family. Tap one to see it at wall scale, lit or unlit, then quote it with one click.
Starlight Extra
01Clear glossy
21 of 21. T is the glossy skin, S the satin.
Why specify it
What Stretch does well
No profiles
Neither vertical nor horizontal frames; the panels are the wall.
Cables and clamps
Steel cables and clamps, mirror polished, tensioned between floor and ceiling.
Easy to install
No frame to fabricate; the hardware is the whole system.
Sees through, in its way
Directional transparency keeps the room open while screening desks from direct view.
Technical data
| Type | Frameless cable hung partition |
|---|---|
| Hardware | Steel cables and clamps, mirror polished finish |
| Profiles | None, vertical or horizontal |
| Panels | Bencore composite panels |
| Made in | Carrara, Italy, by Bencore |
| Supply | Quote only, through FIDAR System, authorized Canadian dealer |
From Bencore's Living catalogue and 2024 technical presentation. Figures not published by Bencore are not shown; ask us for the data sheet of the exact build.
Where it is used
- Open plan office screens
- Meeting area enclosures
- Reception backdrops
- Showroom and gallery dividers
Questions
Stretch questions
How is Stretch fixed?
Steel cables run from floor to ceiling under tension and the panels are held between them with polished clamps. There is no frame, so the fixings are the cable anchors at top and bottom.
Can Stretch use the acoustic panel?
Lightben Acoustic weighs 3.9 kg/m² and is designed to hang on light hardware, so it is a natural pairing for an office that wants to cut noise as well as sight lines. Confirm the panel size with us.
Also in the range
Goes with Stretch
Smart office partitionsUpset
Doors and wallsWallite
Composite panelsLightben Acoustic
Composite panelsLightbenBack to the Bencore range, with the panel finder, the light table, performance data and reference projects.