FIDAR System's marble PVC sheets are rigid, closed-cell PVC foam board with a printed marble film on one face or both. They give a cabinet door, a reception desk front or a run of wall panels the look of stone at a fraction of its weight, and they cut, rout and screw like the PVC board shops already work with.
Marble PVC sheets are made to order, not held in stock. Pick the designs below, then send the design codes, thickness, one or two decorated sides and the number of sheets through the quote form. We reply the same business day with price, availability and lead time, and volume pricing on larger orders.
A marble look across a reception wall, a salon or a retail feature wall without stone's weight, cutting or sealing. The board fixes to a frame or bonds to a flat wall, and the closed-cell core does not take up moisture.
Vanity fronts, cabinet doors and shelving in a stone pattern. Decorated on both sides, the same sheet works for parts seen from both faces, such as open shelves and doors.
Marble fronts and panels for desks, bars and service counters, routed to shape on a CNC router and edge banded where the cut edge shows.
Plinths, display tables, shelving and back walls with a premium stone look, light enough to build, ship and reconfigure.
How to Fabricate Marble PVC Sheets
Plan the cuts with the pattern
Lay out parts so the grain or veining runs the way you want on the finished piece, and keep the protective film on until the part is installed.
Saw or rout, never laser
Cut on a saw with a sharp, fine-tooth carbide blade or on a CNC router with an O-flute bit, and test the setup on an offcut to keep the film edge clean. Never laser cut it: PVC gives off hydrogen chloride gas under a laser.
Finish the edges
A cut edge shows the PVC foam core. Edge band it, cap it with a trim, or place it where it will not be seen.
Fix and bond
Screw or fasten it like other PVC board, with pilot holes, or bond it with an adhesive made for PVC. Leave room for movement on long runs, because PVC expands as it warms.
Thickness Selection Guide
| Thickness | Best For |
|---|---|
| 6mm (~1/4") | Wall panels and feature walls fixed to a flat backing, door and drawer skins, display backers |
| 10mm (~3/8") | Wall panels on battens, splashback panels, counter fronts, fixture faces |
| 12mm (~1/2") | Cabinet backs and fronts, partition faces, reception desk panels |
| 18mm (~3/4") | Cabinet carcasses, doors and shelving, vanity boxes, freestanding fixtures |
| 24mm (~1") | Thick shelves, plinths, desk tops and anything that has to span without support |
Rigid PVC foam board with a printed marble film laminated to one face or both, sold as faux marble sheets or marble PVC board. You get the look of stone on a board that is light, does not absorb water and cuts with ordinary woodworking tools. Ours are 4×8 ft, in 6, 10, 12, 18 and 24mm, in 45 marble designs.
No. The UV marble sheets sold for feature walls are usually thin rigid PVC sheets, around 3mm, with a UV-cured gloss face, made to be glued straight onto a wall. Ours is PVC foam board from 6 to 24mm with a printed marble film, rigid enough to build cabinets, desks and fixtures, and it can be fixed to a frame as well as bonded. A 16mm UV board is available on request.
Yes, indoors. Thinner sheets bond to a flat wall or fix to battens, and the closed-cell core suits bathrooms and kitchens. In commercial and public buildings, walls have flame spread limits tested to CAN/ULC-S102; our fire result is a European EN 13501-1 class, so check the requirement with the project's designer before ordering for a commercial wall.
No, marble PVC sheets are made to order. Send the design codes, thickness, one or two decorated sides and quantity through the quote form and we reply the same business day with price, availability and lead time.
One side has the marble film on the face only, for parts where the back is hidden, such as wall panels and cabinet backs. Both sides carries the film on both faces, for doors, shelves and partitions seen from either side.
Yes. The factory's plain white PVC foam board has passed an EU REACH screening for 219 substances of very high concern, each at or below 0.1% (January 2022), and the EU phthalate restriction, REACH Annex XVII entries 51 and 52, with none of the seven listed phthalates detected (December 2021). Its 15mm white board, fixed to a fibre cement backing, is classed B-s1, d0 under EN 13501-1 for use in cabinets (January 2022). A sample of the supplier's wood grain film was tested against the EU RoHS limits: lead, mercury, cadmium, hexavalent chromium and the brominated flame retardants PBB and PBDE were not detected, and the phthalate DEHP measured 501 mg/kg, under the 1,000 mg/kg limit (June 2024). All are independent laboratory reports on samples, and copies are available on request.
Yes. Other thicknesses from 6 to 25mm, a 16mm UV board, and 37 PET surfaces in solid anti-fingerprint colours and gloss, soft-touch and sparkle finishes are all available by quote. The full list is in the design gallery on this page.
No. PVC gives off hydrogen chloride under a laser, which is hazardous and corrodes the machine. Saw it or rout it on a CNC router.
Yes. Pickup in North York is free, our own truck delivers within 50 km, and we ship to every province; the freight is quoted with the sheets.
Each swatch is scanned from the printed catalogue, so screens show the colour only approximately. Ask for a design and its code goes into the quote form; add as many as the job needs. Click any swatch to see it larger.
Solid colours with an anti-fingerprint face, and minimal finishes in high gloss, soft-touch matte and sparkle, on the same board. Quoted on request.
These are 4x8 ft sheets of rigid PVC foam board with a printed marble film, in 45 designs, decorated on one side or both. They suit the work trade buyers bring us: cabinet and vanity shops, millwork and fixture builders, and fit-out contractors putting a stone look on walls, desks and counters without the weight or the fabrication of stone.
They are made to order rather than held on the rack, so the prices below are per sheet, and the quote confirms availability and lead time. Pick the designs from the gallery, and each one you ask for goes straight into the quote form.
| Thickness | Best for | Per sheet | Per sq ft | Stock |
|---|---|---|---|---|
| 6mm, Decorated one sideabout 1/4" | Wall panels and feature walls fixed to a flat backing, door and drawer skins, display backers | $55.73 | $1.74 | To order |
| 6mm, Decorated both sidesabout 1/4" | Wall panels and feature walls fixed to a flat backing, door and drawer skins, display backers | $65.72 | $2.05 | To order |
| 10mm, Decorated one sideabout 3/8" | Wall panels on battens, splashback panels, counter fronts, fixture faces | $84.33 | $2.64 | To order |
| 10mm, Decorated both sidesabout 3/8" | Wall panels on battens, splashback panels, counter fronts, fixture faces | $94.32 | $2.95 | To order |
| 12mm, Decorated one sideabout 1/2" | Cabinet backs and fronts, partition faces, reception desk panels | $95.33 | $2.98 | To order |
| 12mm, Decorated both sidesabout 1/2" | Cabinet backs and fronts, partition faces, reception desk panels | $105.32 | $3.29 | To order |
| 18mm, Decorated one sideabout 3/4" | Cabinet carcasses, doors and shelving, vanity boxes, freestanding fixtures | $133.83 | $4.18 | To order |
| 18mm, Decorated both sidesabout 3/4" | Cabinet carcasses, doors and shelving, vanity boxes, freestanding fixtures | $143.82 | $4.49 | To order |
| 24mm, Decorated one sideabout 1" | Thick shelves, plinths, desk tops and anything that has to span without support | $196.53 | $6.14 | To order |
| 24mm, Decorated both sidesabout 1" | Thick shelves, plinths, desk tops and anything that has to span without support | $206.52 | $6.45 | To order |
Price per 4x8 ft sheet before tax, read from the same catalogue the quote uses. Volume pricing on larger orders. The best for column is our guidance by thickness, not a structural rating.
The factory's plain white PVC foam board has passed an EU REACH screening for 219 substances of very high concern, each at or below 0.1% (January 2022), and the EU phthalate restriction, REACH Annex XVII entries 51 and 52, with none of the seven listed phthalates detected (December 2021). Its 15mm white board, fixed to a fibre cement backing, is classed B-s1, d0 under EN 13501-1 for use in cabinets (January 2022). A sample of the supplier's wood grain film was tested against the EU RoHS limits: lead, mercury, cadmium, hexavalent chromium and the brominated flame retardants PBB and PBDE were not detected, and the phthalate DEHP measured 501 mg/kg, under the 1,000 mg/kg limit (June 2024). All are independent laboratory reports on samples, and copies are available on request.
EN 13501-1 is a European fire classification, and the B-s1, d0 result was for plain 15mm board on a fibre cement backing, for use in cabinets. It is not a Canadian CAN/ULC-S102 flame spread rating, which is what building codes ask for on walls and ceilings in commercial and public buildings. For cabinets, furniture and fixtures that rarely matters; for wall cladding in a commercial space, confirm the requirement with the project's designer before ordering.
Foam PVC softens as it warms. Palram, which makes Palight foam PVC, rates its board to 60°C, so keep marble PVC panels clear of cooktops, ovens and heaters, and leave room for movement on long wall runs.
Palram PALIGHT fabrication guide (PDF)PVC installation guide
Suppliers use all three names. What matters is what is under the marble face: here it is rigid PVC foam board, the same family as our white PVC sheets, so it routes, screws and bonds the way PVC board does and does not swell when it gets wet.
Thin UV marble wall sheets, around 3mm, are a different product made only to be glued to a wall. If the job is a feature wall and nothing else, either will do; if it is a vanity, a desk or a fixture that has to stand up on its own, choose the board.
Doors, fronts and shelving in a stone pattern on a core that does not swell in a bathroom or kitchen.
Feature walls, reception walls and counters, in multi-sheet orders.
Plinths, tables, shelving and back walls with a marble look, light enough to build and ship.
Marble-faced backers and panels for lobby and directory signs, routed on a CNC router.
So the wrong request does not wait on a reply:
Send the design codes, thickness, one or two decorated sides and the number of sheets through the quote form, and you will have price, availability and lead time the same business day during business hours.
Our warehouse is at Unit 29, 601 Magnetic Drive, North York, Ontario M3J 3J2. Call us if you would rather talk the job through.
Marble PVC sheets: rigid PVC foam board faced with a printed marble film, in 45 designs, decorated on one side or both. 4×8 ft in 6, 10, 12, 18 and 24mm, made to order for cabinets, wall panels and fixtures.
Price per sheet
$55.73CAD
SKU
PVC-MB1-06-4896
Made to order. Not held in stock: the price shown is per 4x8 sheet before tax. Send the design codes, thickness, sides and quantity, and we confirm price, availability and lead time in one quote.
Request a quote
